CLUB SERIES SMITH MACHINEPart # 7187601Rev. BRevision:12/4/011ASSEMBLY INSTRUCTIONS
Clean:• Upholstery with mild soap and water.• Guide rods with a cotton cloth.• Hand grips with mild soap and water.• Frame damage can be repaired with
PARTS LISTPART #71851xx71124xx71125xx7185201718270232030027185001717810171126017104601KEY12345678910QTY1112221262KEY111213141516171819ORPART # 3102922
312 3/8 X 3” BOLT11 3/8 X 2-3/4” BOLT13 3/8” LOWHEIGHT LOCKNUT14 3/8” SAEWASHER18RH CAP(BLACK/WHITE/PLATINUM)15RHWASHER19
4FIGURE 1STEP 1:• LOOSELY assemble the two WEIGHT HORNS (9) and the BOTTOM CROSS BRACE (3) to the RIGHT and LEFT UPRIGHTS (1 &16) as shown in FI
5FIGURE 2STEP 2:01234561/2 1/2 1/2 1/2 1/2 1/2• SECURELY assemble the four WEIGHT HORNS (9) to the RIGHT and LEFT UPRIGHTS (1 & 16) as shown in
6STEP 3:FIGURE 3• Insert the shaft of the HOUSINGS (4) into the ends of the SMITH BAR (7) as shown in FIGURE 3. 7 4!! IMPORTANT !! REMOVE TAPE F
7STEP 4:FIGURE 4• Slide one GUIDE ROD (10) through the upper hole in the UPRIGHT (1 & 16) and proceed to slide one 1” SHAFT COLLAR (6)over the b
8STEP 5:FIGURE 5• Slide the 1” SHAFT COLLARS (6) up the GUIDE RODS (10) to the bushing of the UPRIGHTS (1 & 16) and SECURELYTIGHTEN. SECURELYTI
9FIGURE 6STEP 6:• If necessary, apply the FOREIGN LANGUAGE PLACARD LABEL (17) to the PLACARD LABEL on the RIGHT UPRIGHT (1) asshown in FIGURE 6.17 1•
Comments to this Manuals