Life-fitness 9500HR User Manual

Browse online or download User Manual for Camcorders Life-fitness 9500HR. Life Fitness 9500HR User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 4
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Life Fitness Model 9500HR Treadmills
How to…Install the Support Plate on Damaged Frame Cross-Member/Bracket
Tools required: Hex Key Wrench Set, Socket Set, C-Clamps, Phillips Screwdriver GK26-00002-0063
NOTE: STEPS 1-12 cover Belt, Deck, and Wax Bag Removal.
1. Turn the unit power OFF, then unplug the POWER CORD at the electrical outlet.
2. Remove the front and rear FRAME CAPS on the right side of the unit.
3. Remove the right HANDRAIL FOOT COVER.
4. Remove the mounting bolts
securing right HANDRAIL to
the frame.
5. Before loosening the
STRIDING BELT,
mark the location of the
BELT TENSIONING BOLTS
or record the number of turns
for proper belt re-tensioning.
6. Loosen the STRIDING
BELT by turning the BELT
TENSIONING BOLTS
counterclockwise.
7. Carefully tilt the unit on its left side (user's left) and
remove the rear ROLLER GUARD.
8. Cover the end of the stationary
leg to protect the striding belt
during removal.
9. Remove the striding belt.
10. Carefully tilt the unit back to its
upright, normal operating position.
11. Remove the DECK SCREWS and
DECK.
12. Pinch-off the wax hose and
remove the WAX COVER, BAG,
and TRAY.
Mounting Bolts (4)
Frame
Washer (4)
Wax Bag
Tray
Cover
Page view 0
1 2 3 4

Summary of Contents

Page 1

Life Fitness Model 9500HR TreadmillsHow to…Install the Support Plate on Damaged Frame Cross-Member/BracketTools required: Hex Key Wrench Set, Socket S

Page 2

Life Fitness Model 9500HR TreadmillsHow to…Install the Support Plate on Damaged Frame Cross-Member/BracketNOTE: STEPS 13-16 cover LIFT ACTUATOR REMOVA

Page 3 - Adjusting

Life Fitness Model 9500HR TreadmillsHow to…Install the Support Plate on Damaged Frame Cross-Member/BracketNOTE: STEPS 21-24 cover how to adjust the li

Page 4

Life Fitness Model 9500HR TreadmillsHow to…Install the Support Plate on Damaged Frame Cross-Member/BracketNOTE: STEPS 31-33 cover BELT TENSIONING on N

Comments to this Manuals

No comments