Life Fitness 9500HR User Manual download pdf (Page 28)

HOW TO REMOVE THE HOUSING ON THE

LIFECYCLE 9500HR AEROBIC TRAINER

Step 1

Remove the left-side PEDAL (the user’s left side; small hole-side of the housing) by

turning the PEDAL NUT clockwise with a 5/8” open-end wrench, then remove the

right-side PEDAL by turning the PEDAL NUT counter-clockwise.

Step 2

Remove the two SCREWS securing the right and left COLLAR HALVES to the

FRAME.

Step 3

Remove the screw securing the right SEAT POST SHROUD to the left SEAT POST

SHROUD and gently remove both sides from the SEAT POST.

Step 4

Remove the eight screws (total) from the right side of the shroud at the locations

shown in the illustration on the next page.

Step 5

Swing the right-side CRANK ARM to the two o’clock position and carefully, to avoid

scratching or damaging the shroud, guide the right-side HOUSING up and over the

CRANK ARM and remove from the machine.

Step 6

If you need to remove the user left side of the HOUSING, remove the two internal

SCREWS still securing the left-side HOUSING to the FRAME. Swing the left-side

CRANK ARM to the two o’clock position and carefully, to avoid scratching or dam-

aging the shroud, guide the left-side HOUSING up and over the CRANK ARM and

remove from the machine.

Step 7

Reverse steps 1-5 to return shroud to its original position.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 37 38

No comments

Life Fitness 9500HR User Manual Page 28