HEAVY DUTY MULTI RACK (HDMR)WARNING:Read and follow all directions for each step to insure proper assembly of this product.CLASS SB (Studio): Professi
10STEP 3: LOOSELY assemble the SHORT LEFT UPRIGHT (11) to the LOWER LEFT BASE (2) using two 1/2 X 4-1/2” BOLTS(3), two BACKING DOME WASHERS (4), two
111433566513411127STEP 4: LOOSELY assemble the two MULTI RACK FRONT SUPPORTS (13) to the FRONT LEFT & RIGHT UPRIGHTS (1 &7) and the SHORT LEF
1214134566543782STEP 4: LOOSELY assemble the two REAR UPRIGHTS (14) to the LOWER LEFT & RIGHT BASES (2 & 8) and FRONTLEFT & RIGHT UPRIGHT
13STEP 5: SECURELY assemble the bottom of the ten WEIGHT HORNS (15) to the REAR UPRIGHTS (14) using ten 3/8 x 4-1/2” BOLTS (16), ten BACKING DOME WAS
14STEP 6: Assemble the SHORT BENCH LOCK (19) to the REAR CROSS BRACE (9) using two 1/2 X 3-1/2” BOLTS (20), twoBACKING DOME WASHERS (4), two 1/2” INT
15STEP 7: Spotter Platform accessories are available for the HDMR8. Assemble each Spotter Platform (A) to the FRONT LEFT & RIGHT UPRIGHTS (1 &a
16Clean:• Hand grips with mild soap and water.• Frame damage can be repaired with touch-up paint can be purchased from your Hammer Strength customer s
2HAMMER STRENGTH HEAVY DUTY RACKSSAFETY & WARRANTYPurchasers of Hammer Strength products should read the Owner's Manual and all of the warnin
35,135,449;D321,391;5,100,080;5,171,198;5,273,505;5,181,896;D321,027;5,066,003;D321,389;5,135,456;D321,387;5,125,881;6,203,474B15,044,631;D321,026;5,0
4LIMITED WARRANTYWHAT IS COVEREDThis Hammer Strength commercial exercise equipment (Signature Benches and Racks) is warranted to be free of alldefects
5LIMITED WARRANTYEXCLUSIVE WARRANTYTHIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF ANY KIND EITHER EXPRESSED ORIMPLIED, INCLUDING BUT NOT
6COMPONENTS LIST *ITEM NO. QTY. PART NO. DESCRIPTION1 1 HDMR8-CFUPL-0 FRONT LEFT UPRIGHT2 1 HDMR8-LSFL-0 LOWER LEFT BASE3 42 HHB.5X4.5 1/2 X 4-1/2” BO
7HARDWARE:203165617 418½ X 3-1/2” Bolt½ X 4-1/2” Bolt3/8 X 4-1/2” Bolt½” Internal Lock Washer3/8” Flat WasherBacking Dome Washer3/8” Lock NutBacking D
8STEP 1: LOOSELY assemble the FRONT LEFT UPRIGHT (1) to the LOWER LEFT BASE (2) using two 1/2 X 4-1/2” BOLTS(3), two BACKING DOME WASHERS (4), two 1/
9STEP 2: LOOSELY assemble the REAR CROSS BRACE (9) to the bottom of the LOWER LEFT BASE (2) and LOWERRIGHT BASE (8) using four 1/2 X 4-1/2” BOLTS (3)
Comments to this Manuals