CLASS -SPART # 7946001 REV. AVERSION: FSFCM1-0102-001DATE: 06-13-05WARNING:Read and follow all directionsfor each step to insure properassembly of
STEP 3: Insert two GUIDE ROD BUSHINGS (30) into bottom of FRONT UPRIGHT (1), slide one CUSHION (24) to bottom of eachGUIDE ROD (22) and insert bot
MUST DISASSEMBLE ONE END OF CABLE AND REASSEMBLE AFTER ROUTING (SEE FIG 7 PAGE 14)STEP 4 NOTE: IF THE 50# ADD ON KIT WAS PURCHASED, USE THE CABLE
STEP 5: Insert ball end of GUIDE CABLE 7746001 (42) through eye hook on FLOATING PULLEY BRACKET (11), insert and hookball end of cable into slotted
MUST DISASSEMBLE ONE END OF CABLE AND REASSEMBLY AFTER ROUTING (SEE FIG 7 PAGE 14)STEP 6: Insert ball end of LONG CABLE 7745401 (44) under pulley #
STEP 7: USE THIS ASSEMBLY AT THE END OF EACH CABLE Slide each item onto cable as follows: ITEM 1, ITEM 2, ITEM 3, and insert cable end into ITEM 4.
STEP 8 Attach FRONT SHROUD (8) using two 3/8 X 2-1/2 SCREWS (35) and two 3/8 WASHERS (28) Attach REAR BOTTOM PLATE (13) using two 10-32 X 1/2 SCR
STEP 9: Pre-assemble two FLANGE BEARINGS (23) and SHAFT (32) into ADJUSTMENT HUB as illustrated Attach ROLLER PAD ASSEMBLY (3) to center hole ADJU
STEP 10: Attach TOP COVER (15) using four METAL SCREWS (25) Attach FRONT and BACK MID COVERS (18), (19) to each other using four PLASTIC SCREWS (
18FIGURE 11STEP 11: Lift HEAD PLATE ASSEMBLY and insert 15 or 20 WEIGHT PLATES (46). Apply WEIGHT STACK LABELS (47) starting with “1” on the HEAD P
MAINTENANCE19* We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy water. Touch-up paint can be purchased from
THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OFEQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES!1. Before using, read all the warnings and
Clean:• Upholstery with mild soap and water.• Guide rods with a cotton cloth.• Hand grips with mild soap and water.• Frame damage can be repaired with
21LIMITED WARRANTYLife Fitness® FIT 1.0 CMLife Fitness extends the following LIMITED WARRANTY to the original owner (proof of purchase required, keep
INTERNATIONAL OFFICESLife FitnessAtlantic BVAtlantic HeadquartersBijdorpplein 25-312992 LB BarendrechtThe NetherlandsPhone: (180) 646 666Fax: (180) 6
GYM DIMENSIONS3
4COMPONENTS LIST**SEE PAGE 13, FIGURE 7 FOR ADDITIONAL PART NUMBERSITEM NO. QTY. PART NO. DESCRIPTION1 1 LEA7728202 PTD ASSY, FRONT UPRIGHT2 1 LEA7701
5EXPLODED VIEWSERIAL# (inside of cover)SERIAL #SHROUD KITPLACARD PLACEMENT
601234561/2 1/2 1/2 1/2 1/2 1/2REQUIRED TOOLS:HARDWARE:* 9/16” wrench* Ratchet and 9/16” socket* Adjustable wrench* Tape measure* Two 5/16” Allen wren
701234561/2 1/2 1/2 1/2 1/2 1/2FIGURE 1STEP 1: LOOSELY assemble bottom of the LEFT UPRIGHT (4) and RIGHT UPRIGHT (5) to FRONT UPRIGHT (1)using four
STEP 2: LOOSELY attach BASE PLATFORM (2) to front of FRONT UPRIGHT (1) using two 3/8 x 3/4” BOLTS (31),and two 3/8 WASHERS (28). LOOSELY attach
BEFORE PROCEEDING TOSTEP THREE, REFER TOSHROUD KIT ASSEMBLYINSTRUCTIONS. FRONTSHROUD AND BRACKETSWILL NEED TO BEINSTALLED AS PART OFSTEP THREE9
Comments to this Manuals