Life-fitness Ab/Back Machine User Manual

Ab / BackOwners Manual

10Ab / Back2. Safety & WarrantyIt is the sole responsibility of the purchaser of LIFE FITNESS products to instruct all individuals, whether they a

11WARRANTYWHAT IS COVEREDThis Life Fitness commercial exercise equipment (Hip Abduction / Adduction) is warranted to be free of all defects in materia

12Ab / Back2. Safety & WarrantyEXCLUSIVE WARRANTYTHIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF ANY KIND EITHER EXPRESSED OR IMPLIED,

13General Specifications1. Frame ConstructionFrame is constructed of mechanical quality steel purchased in mill run quantitiesFrame is primarily 2&quo

14Abdominal Crunch4. ExerciseAbdominalStart FinishBackStart Finish

15CLEANOUpholstery with a mild soap and water.OHand grips with mild soap and water.INSPECTOHardware should be checked for looseness. Tighten as requir

©2007 Life Fitness, a division of Brunswick Corporation. All rights reserved. Life Fitnessis a registered trademark of Brunswick Corporation.FSABBA 2.

2Item12345678910111213141516171819202122232425Qty1952502745016142215121212426212Tools Required:O8mm Allen WrenchO3” Ratchet ExtensionO9/16” WrenchO17m

3

4Ab / Back1. Assembly Instructions

51. Assemble the TOWER (A) to the CAM FRAME (B) using two 3/8 X 92mmBOLTS (6), four 3/8 X 67mm BOLTS (2), twelve 3/8" SAE WASHERS (3),twelve 3/8&

6Ab / Back1. Assembly Instructions7. WEIGHT STACK ASSEMBLYInsert the two GUIDE RODS (12) into the base of the TOWER (A) asshown.Slide two WEIGHT STACK

711. Wrap the ball end of the CABLE (8) around one 4-1/2" PULLEY (9) andSECURELY assemble the PULLEY to the FORWARD PIVOT ARM (L) asshown using o

8Ab / Back1. Assembly Instructions13. Slide the metal ring of the WEIGHT STACK PIN (29) over the STEM onthe HEAD PLATE ASSEMBLY (15) as shown.Screw th

918. SECURELY assemble the CAM SHROUD (40) to the CAM FRAME (B)using two 3/8 X 89mm BOLTS (41), four 3/8" SAE WASHERS (3), four3/8" RH WASHE