LCD Entertainment ReadyInstallation Instructions
19. With the remaining TV BRACKET (15) oriented as shown, install it to the back ofthe TV (16) using four SCREWS (17) and WASHERS (6). Tighten the SCR
MODELS NEW 95X CROSS-TRAINERSTOOLS REQUIRED: Phillips Screwdriver, Metric Allen Set, M16 & M17 WrenchPARTSNOT USED FROM KIT: (1) Main Bracket Cap,
9. Tilt the DISPLAY CONSOLE (--) forward and connect the I-RCONTROL (A) and S-VIDEO (--) CABLES to the back of the DIS-PLAY CONSOLE.10. Tape the ends
MODELS NEW 95C UPRIGHT LIFECYCLE®EXERCISE BIKESTOOLS REQUIRED: Phillips Screwdriver, Metric Allen Set, M16 & M17 WrenchPARTSNOT USED FROM KIT: (1)
9. Tilt the DISPLAY CONSOLE (--) forward and connectthe I-R CONTROL (A) and S-VIDEO (--) CABLES tothe back of the DISPLAY CONSOLE.10. Tape the ends of
13MODELS NEW 95R RECUMBENT LIFECYCLE®EXERCISE BIKESTOOLS REQUIRED: Phillips Screwdriver, Metric Allen Set, M16 & M17 WrenchPARTSNOT USED FROM KIT:
INSTALLATION149. Tilt the DISPLAY CONSOLE (--) forward and connect the I-R CON-TROL (A) and S-VIDEO (--) CABLES to the back of the DIS-PLAY CONSOLE.10
15MODELS 95LI SUMMIT TRAINERTOOLS REQUIRED: Metric Hex Key Set, Side Cutters, T-45 Torx Wrench1. Remove the CONSOLE SUPPORT TOP CAP (a).2. Remove the
INSTALLATION16MODELS 95CI, 93C, 90C UPRIGHT LIFECYCLE®EXERCISE BIKESTOOLS REQUIRED: Metric Hex Key Set, Side CuttersNOTE: Proceed with the following s
1710. Attach the ADAPTER BRACKET (AA) to the ENTERTAINMENTCONSOLE (k) to the using four SCREWS (BB). Tighten theSCREWS to 6-8 in-lbs. Do not overtight
INSTALLATION18MODELS 95RI, 93R, 90R RECUMBENT LIFECYCLE®EXERCISE BIKESTOOLS REQUIRED: Metric Hex Key Set, Side CuttersNOTE: Proceed with the following
19MODELS 95SI, 93S, 90S STAIRCLIMBERSTOOLS REQUIRED: Metric Hex Key Set, Side CuttersNOTE: Proceed with the following steps before attaching the DISPL
INSTALLATION20MODELS 95XI, 93X, 90X CROSS-TRAINERSTOOLS REQUIRED: Metric Hex Key Set, Side Cutters, T-45 Torx WrenchNOTE: Proceed with the following s
21MODELS 91TI, 90T TREADMILLSTOOLS REQUIRED: Standard Screwdriver, Phillips Screwdriver, Metric Hex Key Set, Side CuttersNOTE: Proceed with the follow
INSTALLATION2213 Locate the COAXIAL COUPLER (u). Remove the RETAINING NUT (v) and two WASHERS (w& x) from the COUPLER. Insert the COUPLER into the
23MODELS 97TI, 95TI, 93T TREADMILLSTOOLS REQUIRED: Standard Screwdriver, Phillips Screwdriver, Metric Hex Key Set, Side CuttersNOTE: Proceed with the
INSTALLATION247. Attach the ADAPTER BRACKET (n) to the ENTERTAINMENT CONSOLE (o) to the using fourSCREWS (p). Tighten the SCREWS to 6-8 in-lbs. Do not
25CONSOLE CABLE CONNECTIONSVGA INAudio outVideo InS-Video InRF CoaxialAudio InRightLeftWired Remote /Media CablePower InHigh Definition Input
INSTALLATION26
27M051-00K71-A002
CORPORATE HEADQUARTERS10601 West Belmont AvenueFranklin Park, Illinois 60131 • U.S.A.847.288.3300 • FAX: 847.288.3703800.735.3867 (Toll-free within U.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part15 of the FCC Rules. These limit
TABLE OF CONTENTS3Section Description Page1. Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
• DANGER: To reduce the risk of electrical shock, always unplug this Life Fitness product before cleaning orattempting any maintenance activity.• WARN
• DANGER: Pour réduire les risques de décharge électrique, toujours débrancher cet appareil Life Fitnessavant le nettoyage ou toute mesure d'entr
Note to the CATV Installer:This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that providesguideline
MODELS NEW 95TI TREADMILLSTOOLS REQUIRED: Phillips Screwdriver, Metric Allen Set, M16 & M17 WrenchPARTSNOT USED FROM KIT: (1) Main Bracket Cap, (1
Comments to this Manuals