G7 CABLE MOTION™GYM SYSTEM ASSEMBLY INSTRUCTIONSG7-002 / CLASS H / 10/14/08 / 8352100 REV. B
10144 4344432311444434443111ABNOTE: Two person assembly is recommended.STEP 1: Use the following hardware contained in Blister Pack (7-1): M10 x 20mm
1112504444491114450STEP 2:Use the following hardware contained in Blister Pack (7-1): M10 x 70mm SCREW (Qty. 4) M10 WASHER (Qty. 8) M10 HEX NYLOCK
12STEP 3:Use the following hardware contained in Blister Pack (7-2): M10 x 45mm SCREW (Qty. 2) M10 WASHER (Qty. 8) M10 HEX NYLOCK NUT (Qty. 4) M10
13STEP 4:Use the following hardware contained in Blister Pack (7-2): M5 SHOULDER SCREW (Qty. 32) M5 HEX SCREW (Qty. 8) M6 WASHER (Qty. 8) Remove t
145515541817G201611192659STEP 5: Use the following hardware contained in Blister Pack (7-3): M10 x 50mm HEX TENSION SCREW (Qty. 4) GUIDE ROD RETAINE
15STEP 6: Uncoil the cables to remove all twists. Remove the (UPPER) PULLEYS (13) on the RIGHT TOWER (11) and LEFT TOWER (1) by removing the M10 x5
16STEP 7:Use the following hardware contained in Blister Packs (7-3), (7-4) and (7-5): M10 WASHER (Qty. 4) M10 HEX NYLOCK NUT (Qty. 2) M10 x 45mm S
Slide Mechanism to insertor Exchange HandlesCableKMJLKI17STEP 8: Dissemble one QUICK CONNECT by removing the two M5 HEX SCREWS (M) from the QUICK CON
18STEP 9: Make adjustments to the HEAD PLATE PULLEY (19) and the threaded cable end to adjust cable length and toensure the cable is taut. If the t
1922444343441STEP 10:Use the following hardware contained in Blister Pack (7-4): M10 x 20mm SCREW (Qty. 8) M10 WASHER (Qty. 8) Install one FOOT EXT
2TABLE OF CONTENTSSafety Statement . . . . . . . . . . . . . . . .2 Required Hardware . . . . . . . . . . . . . . . .8G7 Warning Labels . . . . . . .
20113254645 58572450444449325STEP 11:Use the following hardware contained in Blister Pack (7-6): M5 HEX SCREW (Qty. 12) M6 WASHER (Qty. 12) M10 x 1
21STEP 12: Adjust the rollers if the ROLLER CARRIAGE (28) rolls up and down the tube with difficulty, or if it seems to sloppy. Unscrew the cable en
223931323635STEP 13: The G7 comes with the following accessories: THIGH STRAP (31), FOOT STRAP (32), HANDLES (35), SNAPLINKS (36), LONG BAR (41), an
23STEP 14: Use the FRONT HANDLE (Q) to tilt the bench. Steer the bench to align with the U BRACKETS (R). Insert one PIN (S) into each bracket so
24MAINTENANCEPlease note:* We recommend cleaning your product (pads and frame) on a regular basis, usingwarm soapy water. Touch-up paint can be purcha
25LIMITED WARRANTYLife Fitness® G7 Cable Motion™ Gym SystemLife Fitness extends the following LIMITED WARRANTY to the original owner (proof of purchas
CORPORATE HEADQUARTERS5100 North River RoadSchiller Park, Illinois 60176 • U.S.A.847.288.3300 • FAX: 847.288.3703800.735.3867 (Toll-free within U.S.A.
3INSPECTION1. DO NOT use or permit use of any equipment that is damaged and or has worn or broken parts. For all LIFE FITNESS equipment use only repla
4G7 WARNING LABELSNOTE: Lock the weight stack when not using the gym. Make sure all the weight plates are resting on the plate belowwith no gap in bet
5GYM DIMENSIONS Weight: 720 lbsResistance Ratio: 1:2Weight Stack: 160 lbs
6G7 LIVE AREA12”12”10’18’-8”NOTE: The live area shows the extent of the G7 gym. It does not include the user.
7COMPONENTS LISTITEM NO. QTY. DESCRIPTION1 1 LEFT TOWER2 1 TOP BRACKET TUBE3 1 MIDDLE BRACKET TUBE4 1 BOTTOM BRACKET TUBE5 1 LEFT SLIDE TUBE (WITH ROL
8COMPONENTS LISTHARDWARE ITEM NO. QTY. DESCRIPTION43 32 M10 X 20MM SCREW44 58 M10 WASHER45 20 M5 HEX SCREW46 20 M6 WASHER47 4 M10 X 55MM SCREW48 2 M10
9HARDWARE:M10 X 50MM HEX TENSION SCREW (#55)M10 HEX NYLOCK NUT (#49)M10 SOCKET NUT (#51)M10 WASHER (#44)M10.5 WASHER (#58)M10 X 20MM SCREW (#43)M5 HEX
Comments to this Manuals