Life Fitness SM63 User Manual download pdf (Page 6)

SM63 Unpacking & Assembly Instructions

Figure 5. Configuration for 2-3/4” and 3” bolts.

3. Using a 5/8” socket with long extension and combination wrench, bolt on the

connecting beam to the cubes using two of the large 7/16” x 6” bolts, 7/16” washers,

and 7/16” nuts, end cap washers and end caps. Figure 6 shows the connected cubes.

You will need to remove the pulleys from the teardrop pulley assemblies to gain

clearance for the socket wrench extension. Leave the pulleys out of the housings until

the cables have been installed.

1 2 3 4 5 6 7 8 9 10 11 ... 22 23

No comments

Life Fitness SM63 User Manual Page 6