Life Fitness SM63 User Manual download pdf (Page 8)

SM63 Unpacking & Assembly Instructions

4. Using a 5/8” socket and combination wrench, mount the 56” lat tops (part T from

HARDWARE section) to the cells by inserting two of the large 7/16” by 6” bolts using

the hardware configuration shown in Figure 8. Mount the 29” tricep top (part U in

HARDWARE section) and adjustable crossover top (part V in HARDWARE section)

to the frame and connecting beam (See Figure 7). You will need to remove the

teardrop pulleys from their housings to gain clearance for the socket extension used

to tighten the bolts on the tops. Use a 9/16” socket and combination wrench to do

this.

7/16” x 6” (6)-

mount on tops

3/8” x 3” (2)-

bolt top

beams together

3/8” x 3” (2)-

bolt top

beams together

Remove pulleys from

housings to give clearance

to socket extension

Figure 7. Mount lat tops (T), tricep top (U), adjustable crossover top (V).

Figure 8. Configuration for 6” bolts.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 22 23

No comments

Life Fitness SM63 User Manual Page 8