Life Fitness T30/T35 User Manual download pdf (Page 47)

6.3 HOW T

O ADJUST AND

TENSION THE STRIDING BELT ON THE LIFE FITNESS TREADMILL

Do not move treadmill or place hands under treadmill while it is plugged into an electrical outlet!

Tool required: 5/16" hex key wrench

THE BELT

TENSIONING BOLTS

The Life Fitness treadmill has access holes in the rear roller guards, which allow access to the tensioning bolts. These

tensioning bolts make it possible to adjust tracking and centering of the striding belt (A) without removing the guards.

NOTE: It is extremely important that the treadmill be correctly leveled prior to any tracking adjustments. An unstable unit

may cause striding belt misalignment. See "How To Stabilize the Life Fitness Treadmill" in the "Set Up" section prior to

attempting any rear roller adjustments.

Before proceeding, it is helpful to visualize the REAR ROLLER (B) pivot point (C). Each adjustment made to one side of

the ROLLER must be met with an equal and opposite adjustment (D) to the other side of the ROLLER to maintain an

ideal belt tension at the pivot point.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 56 57

No comments

Life Fitness T30/T35 User Manual Page 47