Life Fitness Treadmill T5I User Manual download pdf (Page 31)

6.3.3 TENSIONING AN EXISTING STRIDING BELT

1 Enter the Manual Workout and run the treadmill for five minutes at 5.0 mph (8,0 kph).

NOTE: Do not run on belt.

2 Reduce the speed to 2.0-mph (3,2 kph). Walk on the treadmill, tightly grip the handrails and attempt to stall the

striding belt. If the belt slips, continue to Step 3. If it does not slip, the tension is correct.

3 Using the Stop Key, stop the treadmill. Turn the belt tensioning bolts clockwise 1/4-turn per side to tension, do

not exceed one full turn (four 1/4 turns per side).

4 Enter the Manual Workout and run the treadmill at 2.0-mph (3,2 kph) check to insure proper tracking. If the

Striding Belt drifts to the left or right see "Tracking (Centering) an Existing or New Striding Belt" on the previous

page.

NOTE: Do not over tighten the tensioning bolts while making belt adjustments. Over tightening of bolts may over

stretch and damage the striding belt or roller bearings. Do not exceed one full turn of either bolt in either direction.

1 2 ... 26 27 28 29 30 31 32 33 34

No comments

Life Fitness Treadmill T5I User Manual Page 31